manufacturer category series package voltage class rev . date ecliptek corp. oscillator ep11 14 pin dip 5.0v os44 12/05 ep11 series ? programmable crystal oscillators ? hcmos/ttl output ? +5.0v supply voltage ? tri-state and power down options ? custom lead length & gull wing options ? 14 pin dip metal package ? rohs compliant (pb-free) oscillator ep11 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. h 5.08 w 20.8 l 13.2 1.000mhz to 125.000mhz -20c to 70c or -40c to 85c -55c to 125c 5.0v dc 10% 45ma maximum (unloaded) 30ma maximum (pin 1=ground) 50a maximum (pin 1=ground) 100ppm or 50ppm maximum 2.4v dc minimum i oh =-16ma v dd -0.4v dc minimum i oh =-16ma 0.4v dc maximum i ol =+16ma 4 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 50pf cmos load maximum 15pf cmos load maximum 10ttl load maximum 5ttl load maximum tri-state power down enables output disables output: high impedence disables output: logic low 5ppm / year maximum 10 mseconds maximum 50psec maximum, 13psec typical 13psec maximum, 8psec typical 500psec maximum, 90psec typical 100psec maximum, 50psec typical frequency range operating temperature range storage temperature range supply voltage (v dd ) input current disable current (ts option) standby current (pd option) frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability / output type-cmos load drive capability / output type-ttl output control function output control function input voltage aging (at 25c) start up time rms jitter peak to peak jitter inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/ttl load w/cmos load w/ttl load or w/cmos load 0.8v dc to 2.0 v dc w/ttl load or 20% to 80% of waveform w/cmos load at 1.4v dc w/ttl load; at 50% of waveform w/cmos load at 1.4v dc w/ttl load (<27.000mhz only), or 50% of waveform w/cmos load (<50.000mhz only) <50.000mhz >50.000mhz <40.000mhz >40.000mhz t s pd v ih : no connection or >2.0v dc v il : (ts option) <0.8v dc v il : (pd option) <0.8v dc <12.000mhz >12.000mhz <12.000mhz >12.000mhz
ecliptek corp. oscillator ep11 14 pin dip 5.0v os44 12/05 manufacturer category series package voltage class rev . date ep11 00 et t ts l - 24.000m - cl125 frequency tolerance / stability 00=100ppm maximum 45=50ppm maximum operating temp. range blank=-20c to 70c , et=-40c to 85c duty cycle blank=50 10(%) , t=50 5(%) output control function ts=tri-state enable high, pd=power down available options blank=none clxxx=custom lead length g=full size gull wing frequency output type l=ttl, c=cmos part numbering guide line 1: ecliptek line 2: ep11 ts output control function pd = power down ts = tri-state enable high series designator line 3: xx.xxx m frequency (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot ? pin 1: tri-state or power down pin 7: case ground pin 8: output pin 14: supply voltage notes _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ environmental/mechanical specifications marking specifications mechanical dimensions all dimensions in millimeters 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 characteristic specification solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215
|
